uxcell Ceiling Fan Capacitor CBB61 10.5uF 350V AC 2 Wires Metallized Polypropylene Film Capacitor 50x40x30mm for Electric Fan Pump Motor Generator 2Pcs: Industrial & Scientific

uxcell Ceiling Fan Capacitor CBB61 10.5uF 350V AC 2 Wires Metallized Polypropylene Film Capacitor 50x40x30mm for Electric Fan Pump Motor Generator 2Pcs: Industrial & Scientific

---

Used it to repair the capacitor on my carpet dryer and now it works perfectly so no complaints so far.. I'll update if need be
I needed one of these to replace a capacitor in a submersible pump I was rebuilding. Functioned properly. No issues.
Used as a replacement starting capacitor for a vintage Akai Reel to reel unit. Works as advertised, no problem so far.
It didn't work for my fan but i was able to return the product

---

Price: US $9.99
Rating: Previous / 5.0 fromReviews

---

Specification

[Material] - Made of metallized polypropylene film sheet with plastic shell
[Specification] -Rated Capacity: 10.5uF; Tolerance: ±5%; Rated Voltage: 350V AC; Cover Size: 50x40x30mm / 2x1.6x1.2inch; Rated Frequency: 50/60Hz; Climatic Category: 40/85/21
[Working Environment] - This CBB61 capacitor is applied to starting and working of single-phase motor in 50Hz/60Hz AC electric power system
[Application] - The CBB61 capacitor is widely used for ceiling fan, wall fan, stand fan, industrial fan, range hood fan, air exchange fan, water pump, motor, generator, etc
[Note] - If the ceiling fan works slowing down or cannot work or cannot work at different speeds as it used to, please check the CBB61 ceiling fan capacitor first. The capacitor may be burnt out or weak, you need to replace it with a new one

---

Description

Method for Replacing Capacitors:

• 1. Cut off the power first to avoid electric shock;
• 2. Discharge the old capacitor;
• 3. Install the new capacitor according to the original wiring method.

Advantage

This CBB61 run capacitor has advantages of low loss, excellent electrical performance and long service life.

Application:

The CBB61 capacitor is widely used for ceiling fan, wall fan, stand fan, range hood fan, air exchange fan, pump, motor, generator, etc.

Note:

If the ceiling fan works slowing down or cannot work or cannot work at different speeds as it used to, please check the CBB61 ceiling fan capacitor first. The capacitor may be burnt out or weak, you need to replace it with a new one.

• Material: Made of metallized polypropylene film sheet with plastic shell.
• Working Environment: This CBB61 capacitor is applied to starting and working of single-phase motor in 50Hz/60Hz AC electric power system.

Read more

Application

Ceiling Fan	Air Exchange Fan	Wall Fan	Stand Fan

Read moreRead more

	CBB61 Capacitor	CBB61 Capacitor	CBB61 Capacitor	CBB61 Capacitor	CBB61 Capacitor	CBB61 Capacitor
Style	2 Wires	3 Wires	4 Wires	5 Wires	Single Insert	Doule Insert
Rated Capacity	15uF	5uF+5uF	4.5uF+5uF+5uF	4.5uF+5uF+6uF	3uF	8uF

---

Our A/C went out right before a nice muggy hot spell. I'm no HVAC tech but I was able to trace the most likely cause to a failed start capacitor on the blower motor. In our case (an oil burner setup, with a/c coils below, blower above all), a little disassembly was required to pull out the blower and test it properly. Not too tough though. The capacitor a a very simple switch out, it's attached to the blower housing not the motor itself, and has just two quick connect wires. Tested it with an extension cord and scrap wire leads (worked, yay!) before putting it all back together and enjoying cool air again. Glad when I can fix such a vital item myself and for such a small cost.
Update: 2 Items 1 paint marks on top of capacitors denote high and low tolerance band on parts. White dots means low tolerance parts which is what I have received on last order. This means capacitance is on the lower half of the tolerance band. While they work they also should be sold at a reduced price because they have less useful life in them. 2 I have switched to another brand because of this. Look in the photos Yellow dots are high tolerance band parts that would have a longer life or longer useful life to me. If you want to change out parts more often use the white dot ones but climbing in a hot attic to change them out is not fun and left in too long when capacitance value gets too low runs the risk of overheating the blower motor and damaging it. So far so good it's been installed for a month plus and working great. This was purchased for a Goodman air handler blower motor replacement and the original that was in since 2005 was made by GE and I believe that GE sould this off to Genteq? Anyway this one and the GE branded one with same blue and white label both say made in Mexico. Had a recent lightning strike in the neighborhood and noticed blower air stream was very low after that.... Took me a few days to check the blower motor cap and sure enough the 7.5 uF was measuring about 6.6 or so and put this Genteq in that measured 7.5 uF and blower airstream is back to normal again. Ordered another one as a spare so I'll be prepared for any future problems. Be safe and informed on how to replace these yourself or if you are not comfortable with that seek out the help of a qualified person to do that for you. Point is they should be checked and replaced when needed because they can contribute to a decreased life of the blower motor, less cooling,
etc. when they go bad.
Not sure why these are labeled as Gentrec instead of GE? Was a bit apprehensive purchasing this at first. These are rated the same uf but are shorter. Will measure the capacitance after a year and report back.

Edit: 1/21/18
Furnace motor makes a humming noise upon startup. Found out capacitor is not within specs after one month testing with a multi-meter. Replacement sent. Thank you Amazon.

---

• Package Dimensions‏:‎6.22 x 5.08 x 2.44 inches; 5.43 Ounces
• Date First Available‏:‎May 8, 2021
• Manufacturer‏:‎uxcell
• ASIN‏:‎B094FCDQ4L

---